Prescott Valley Epoxy Pros

Concrete Floor Leveling in Prescott Valley, AZ

Concrete floor leveling before epoxy coating in Prescott Valley, AZ. Self-leveling underlayment, free estimates.

15+ Years local experience
500+ Projects completed
Licensed & Insured

Serving Prescott Valley and nearby communities.

Got low spots or an uneven garage slab that pools water after a rain? Leveling is the prep step that fixes that before any coating goes down. It's not cosmetic, it's structural prep.

Prescott Valley Epoxy Pros handles leveling as a standalone service or paired directly with a coating job, depending on how bad the unevenness is. Older slabs around Yavapai County, especially ones poured decades ago without modern grading standards, often need this step before anything else happens.

What's included

What's Included

Typically included: Optional: Customer prep:

Floor elevation survey to map low and high spots
Grinding of high points
Self-leveling underlayment pour where needed
Moisture barrier primer under the leveling compound
Fiber-reinforced mix for slabs with minor cracking
Clear the space completely before the leveling pour
Note where you've seen standing water or pooling after rain

Want a clearer scope?

Get a Free Estimate Call (928) 985-3203

Concrete Floor Leveling

Concrete Floor Leveling Process

Floor Elevation Survey — A survey maps low spots and height differences across the slab.
Surface Cleaning — Dust and debris get removed so the compound bonds properly.
Crack Pre-Treatment — Existing cracks get addressed before any leveling material goes down.
Self-Leveling Pour — A flowable compound gets poured and spread across uneven areas.
Smoothing & Finishing — The compound gets smoothed for a flat, uniform surface.
Cure Time & Inspection — The leveled floor cures fully, then gets inspected for flatness.

Questions about this?

Get a Free Estimate Call (928) 985-3203

Materials

Materials and Methods for Concrete Floor Leveling

Self-Leveling Underlayment
Flows into low spots, common on older slabs that were never properly graded when poured.
Fast-Setting Leveler
Cuts downtime between leveling and the coating that follows.
Bonding Primer
Improves adhesion between old concrete and the new leveling layer, important on weathered slabs.
Fiber-Reinforced Compound
Adds strength and cuts down on cracking in the leveled layer.
Polymer-Modified Mix
Adds flexibility, helping the leveled surface handle Prescott Valley's seasonal temperature swings.
Moisture Mitigation Primer
Reduces moisture moving up through the slab into the new leveling material.

Questions on materials?

Get a Free Estimate Call (928) 985-3203

When to call

When to Call for Concrete Floor Leveling

Call Prescott Valley Epoxy Pros if any of these sound familiar.

Water pools in one spot after rain instead of draining
You can see or feel a noticeable dip walking across the garage
An old slab was never properly finished and has visible low spots
A coating applied over an uneven slab is already cracking at the low points

Seeing warning signs?

Get a Free Estimate Call (928) 985-3203

FAQs

Concrete Floor Leveling FAQs

Can you epoxy over an old cracked concrete slab or does it need to be replaced?

Cracks get repaired and the slab gets leveled rather than replaced. Full replacement is rare and usually only needed for serious structural damage.

How do I know if my garage floor has a moisture problem before coating?

A moisture test, either calcium chloride or relative humidity, measures vapor coming through the slab. This gets checked before leveling and before coating on any older floor.

How much does concrete floor leveling cost?

Pricing depends on square footage and the depth of unevenness, and it's usually quoted separately from coating work. Ask for a free estimate once the slab has been assessed.

Do I need a permit for concrete floor leveling?

Leveling is considered prep work on an existing slab and typically doesn't require a permit. Always confirm with the county if your project involves more than surface leveling.

How long does leveling add to a coating project timeline?

Leveling usually adds 1 to 2 days before coating can start, depending on the thickness of the compound and cure time needed.

Before & after

Before and After Concrete Floor Leveling

Before
After

Next step

Get a Concrete Floor Leveling Estimate in Prescott Valley

Call Prescott Valley Epoxy Pros for a free estimate on leveling before your coating project. Visit Home, reach out via Contact, or pair this with Concrete Crack Repair if cracks are also an issue.

Get a Free Estimate Call (928) 985-3203

How it works

Our process

Step 1
Floor Elevation Survey
A survey identifies low spots and height variations across the slab.
Step 2
Surface Cleaning
Dust and debris are removed to allow leveling compound to bond properly.
Step 3
Crack Pre-Treatment
Existing cracks are addressed before leveling material is poured.
Step 4
Self-Leveling Pour
A self-leveling compound is poured and spread across uneven areas.
Step 5
Smoothing & Finishing
The leveling compound is smoothed to achieve a flat, uniform surface.
Step 6
Cure Time & Inspection
The leveled floor is left to cure and then inspected for flatness.