Prescott Valley Epoxy Pros logoPrescott Valley Epoxy ProsEpoxy Flooring · Prescott Valley, AZ
Patio & Pool Deck Epoxy Coatings photo

Prescott Valley Epoxy Pros

Patio & Pool Deck Epoxy Coatings in Prescott Valley, AZ

Outdoor patio and pool deck epoxy coatings in Prescott Valley, AZ. Slip-resistant, UV-stable. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Prescott Valley and nearby communities.

Slippery pool deck after a swim? Faded, chalky patio coating from years of sun? Those are the two calls Prescott Valley Epoxy Pros gets most for outdoor concrete.

Outdoor coatings aren't the same system used indoors. Patios and pool decks need UV-stable topcoats and slip-resistant texture, and across the Verde Valley that sun exposure is more intense than what a garage floor ever sees. The crew preps, repairs, and coats these surfaces with that exposure in mind, not an indoor-rated product stretched outdoors.

What's included

What's Included

Typically included: Optional: Customer prep:

  • Pressure washing and surface cleaning
  • Crack and joint repair as needed
  • Slip-resistant base coat with UV-stable topcoat
  • Cool-deck additive to reduce surface heat around pools
  • Decorative color pattern or border detail
  • Clear furniture, planters, and pool equipment from the area
  • Note any drainage issues or standing water spots

Patio & Pool Deck Epoxy Coatings

Patio & Pool Deck Coating Process

  • Outdoor Surface Inspection — The deck or patio gets checked for cracks, drainage, and wear.
  • Surface Cleaning — Pressure washing clears dirt, algae, and old coating residue.
  • Crack & Joint Repair — Cracks and expansion joints get repaired to block water intrusion.
  • Slip-Resistant Base Coat — A textured base coat improves footing near the pool.
  • Decorative Finish Application — A color or pattern layer gets added for appearance.
  • Weatherproof Topcoat — A UV-stable topcoat seals against sun and water exposure.

Materials

Materials and Methods for Patio & Pool Deck Coatings

  • UV-Stable Epoxy photo

    UV-Stable Epoxy

    Resists the fading that outdoor concrete sees across a full Arizona sun season.

  • Textured Slip-Resistant Coating photo

    Textured Slip-Resistant Coating

    Gives safer footing on wet pool decks, especially barefoot.

  • Cool-Deck Additive photo

    Cool-Deck Additive

    Cuts surface heat buildup on direct-sun patios and decks.

  • Waterproof Membrane photo

    Waterproof Membrane

    Blocks water penetration into the slab beneath heavy seasonal rain.

  • Decorative Color Pigment photo

    Decorative Color Pigment

    Matches patio color to the rest of the home's exterior palette.

  • Weather-Resistant Sealant photo

    Weather-Resistant Sealant

    Handles freeze-thaw cycling at this elevation along with heavy monsoon rain.

Timeline

How Long Does a Patio & Pool Deck Coating Take?

Outdoor jobs depend more on weather windows than garage jobs do.

  1. 01

    Consult and assessment

    same day
  2. 02

    Cleaning and crack repair

    1 day
  3. 03

    Base coat application

    1 day
  4. 04

    Topcoat application

    1 day
  5. 05

    Full cure before foot traffic

    2–3 days

Need a schedule that fits?

Get a Free Estimate

FAQs

Patio & Pool Deck Coating FAQs

Can epoxy flooring handle freeze-thaw cycles in Prescott Valley winters?

Outdoor-rated systems with flexible polyaspartic or polyurea topcoats hold up better than rigid epoxy alone under repeated freeze-thaw movement. That's why outdoor jobs use a different material mix than garage interiors.

Is a flake floor coating worth the extra cost outdoors?

Flake can work on covered patios, but open pool decks usually do better with a plain slip-resistant texture since UV exposure and foot traffic are heavier out there.

Do I need a permit for a patio or pool deck coating?

Most residential patio and deck coating work is permit-free. Pool equipment areas or structural deck work may differ, so confirm with the county if your project touches those zones.

How does sun exposure affect the coating choice for outdoor areas?

Non-UV-stable products yellow and chalk within a season under direct sun. That's why outdoor jobs use polyaspartic or polyurea topcoats rated for sustained UV exposure.

Can pool deck coatings be applied around existing pool equipment?

The crew works around pumps, drains, and equipment pads, masking and protecting fixed features during application.

Before & after

Before and After Patio & Pool Deck Coatings

  • Patio & Pool Deck Epoxy Coatings photo
    Before
  • Patio & Pool Deck Epoxy Coatings photo
    After

Next step

Get a Patio & Pool Deck Coating Estimate in Prescott Valley

Call Prescott Valley Epoxy Pros for a free estimate on your outdoor concrete. Visit Home for the full lineup, reach out via Contact, or check Epoxy Floor Coatings for indoor spaces.

How it works

Our process

  1. Outdoor Surface Inspection photo
    Step 1

    Outdoor Surface Inspection

    The deck or patio surface is checked for cracks, drainage, and wear patterns.

  2. Surface Cleaning photo
    Step 2

    Surface Cleaning

    Pressure washing removes dirt, algae, and old coatings before application.

  3. Crack & Joint Repair photo
    Step 3

    Crack & Joint Repair

    Cracks and expansion joints are repaired to prevent future water intrusion.

  4. Slip-Resistant Base Coat photo
    Step 4

    Slip-Resistant Base Coat

    A textured base coat is applied to improve footing around pool areas.

  5. Decorative Finish Application photo
    Step 5

    Decorative Finish Application

    A decorative color or pattern layer is added for aesthetic appeal.

  6. Weatherproof Topcoat photo
    Step 6

    Weatherproof Topcoat

    A UV-stable topcoat seals the surface against sun and water exposure.

Ask about Patio & Pool Deck Epoxy Coatings

Tell us about the project and how to reach you.

Call (928) 985-3203